Rivet-Rak Boltless Shelving Beams by Tri-Boro

Tri-Boro Rivet-Rak Beams for Boltless Shelving come in a variety of styles and lengths. See below and in the drop down menu for options.

Need full boltless shelving kits? Click here. 

Single Rivet Light Beam

Spec: 14 gauge 3/4" x 1-1/4"
Length options: 12", 15:, 16", 18", 24", 30", 36", 42", 48"

Double Rivet Z Beam

Double Rivet Z - Heavy Duty Beam

Spec: 14 gauge 1-1/8" x 2-5/8"
Length options: 54", 60", 69", 72"

Double Rivet Angle Beam

Spec: 14 gauge 1” x 2-3/4”
Length options: 12", 15", 16", 18", 24", 30", 36", 42",48", 60", 69",72", 84", 96"

Double Rivet Channel Beam

Rivet-Rak Shelving Features 

• Wide span capability
• Boltless, clipless construction
• Assembles in minutes
• Rivets lock into keyholes for added stability
• All components are powder coated
• Shelf sizes up to 48” x 96”
• Standard heights to 22’ available
• Shelves are adjustable on 1-1/2” centers
• Various sizes and shelf capacities
• Custom configurations available
• Particle board shelves and wire decking available

Freight cost (send by email) - FOB Farmville, VA

Additional notes:

RIVET-RAK storage units are made up of posts, side-to-side beams and front-to-back
beams. There are certain minimum requirements for beam use to ensure structural
stability and safety. For example: all units must have 4 double rivet beams at top and
bottom for stability. (2 side-to-side and 2 front-to-back, or full perimeter)

Follow these guidelines when specifying components:

• All units require a full perimeter of double rivet beams at top and bottom of unit.

• Single Rivet Light Beam (RBL) units 24” deep or less:

- do not require single rivet beams front-to-back at each intermediate level
in the unit.

- 6’ - 8’ high must have one single rivet beam intermediate level front-to-back,
located approximately in the middle of the unit.

- 9’ - 10’ high must have two single rivet beam intermediate levels front-to-back,
located to divide the height into 3 equal parts.

- 11’ - 16’ high must have three intermediate levels; a full perimeter of double
rivet beams in the middle plus intermediate levels of front-to-back single rivet
beams in the upper and lower halves of unit.

Single Rivet Light Beam (RBL) units 30” deep or greater:
- All units must have single rivet beams front-to-back at every intermediate level:
units 11’ - 16’ must have single rivet beams front-to-back at every intermediate
level PLUS a full perimeter level of double rivet beams located approximately in
the middle of the unit.

• Double Rivet Angle Beams and Double Rivet Channel Beams must have front-to
back beams at each beam level to provide decking support and ensure stability.
When using Double Rivet Channel Beams from side-to-side, Double Rivet Angle
Beams must be used from front-to-back.

• Rivet Tie Plates are recommended to tie adjacent angle post units together and to
ensure structural stability. Tie plates should be used at the top and bottom of
adjacent posts with additional tie plates spaced no more than 48” apart.
Tie plates are not used on units with T posts.